Commercial security camera installation in Austin, Texas
Clear, reliable footage under any conditions, managed across every site from one interface. Interior and exterior CCTV camera systems designed, installed, and serviced by the same team that runs your access control.
What we install
- Interior and exterior systems. 24/7 visibility, indoors and out.
- Advanced analytics. Detect loitering and unauthorized access in real time.
- License plate recognition. Capture and log vehicles at entry points.
- Centralized management. Live feeds and recordings across sites, one interface.
Platforms we support
Platform-agnostic on purpose. The video management system (VMS) follows the building, the retention rules, and who needs access.
- Eagle Eye Networks. Cloud video with centralized management and real-time analytics for multi-location businesses.
- Milestone Systems. Scalable VMS supporting a wide camera range, highly customizable for retail, transportation, and healthcare.
- Salient Systems. CompleteView VMS for large facilities, integrating access control and analytics.
- Hanwha Vision. Cameras with advanced image quality and intelligent analytics for demanding environments.
- i-PRO. Network cameras, embedded recorders, and VideoInsight VMS, with AI features on the camera.
- OpenEye. Local recording with cloud management.
- DMP. Video surveillance alongside DMP access control and intrusion detection. We are an authorized DMP dealer.
Office and warehouse camera planning
Start from what the footage has to show, then pick cameras, lighting, and recording to match.
Offices
Coverage goals usually come first: entrances and exits, reception, shared corridors, and the stair and elevator lobbies where people arrive. Cameras at doors work best when they can see a face at the credential reader, not only the room behind it. Interior lighting is usually adequate, but glass fronts and bright windows can wash out a camera facing them.
Warehouses and yards
Loading docks, overhead doors, pedestrian entries, fenced lots, and parking are the common priorities. Large open floors, dim aisles, and headlights at night change which cameras and lenses make sense, so a site walk beats a catalog list. Where vehicles matter, plate capture needs its own camera aimed for it.
Taking over or reusing an existing system
Before deciding to keep or replace anything, the system is assessed in pieces:
- Cameras. Model, age, image quality, and whether they are network or analog.
- Recorder and VMS. Platform, version, storage, and whether it is still supported.
- Cabling. Condition, pathways, and whether existing runs can carry what you want to add.
- Licenses. What is licensed, to whom, and what expansion costs.
- Credentials. Who holds the administrator logins, and whether you own them.
Retention and storage
Days of retention, resolution, and frame rate all multiply into storage. Keeping 30 days instead of 14 roughly doubles the disk needed, and higher resolution or frame rate raises it further. Decide the retention period first, then size storage and camera settings to hit it, instead of the other way around.
Network and on-prem versus cloud
Every camera stream uses bandwidth, and cloud recording sends that traffic off site. Sites with limited upload speed often record locally; multi-site operations that want central management often choose cloud or hybrid. Ask any installer how many cameras the switches and uplinks can carry before you buy.
For the full list of cost factors, see what drives security camera system cost.
Common questions
Do you support the camera and VMS platform we already run?
Usually. AK Technologies installs and services Eagle Eye Networks, Milestone Systems, Salient Systems, Hanwha Vision, i-PRO, OpenEye, and DMP, so an existing system can often be expanded or taken over rather than replaced. Where a platform is genuinely at end of life, we say so instead of selling around it.
Cloud, on-premises, or both?
All three are in normal use. Cloud suits multi-site operations that want centralized management without local servers; on-premises suits sites with bandwidth limits or retention rules that keep footage local; hybrid keeps local recording with cloud management. The right answer follows retention requirements, bandwidth, and who needs access, not a house preference.
Can cameras be tied into access control and intrusion?
Yes, and that is the point of using one integrator. Video tied to access control and intrusion means an alarm arrives with corroboration: a door forced with no badge read is a different event from one with a credential behind it. We install all three, so they are commissioned together rather than handed between vendors.
Do you do license plate recognition?
Yes. License plate recognition captures and logs vehicles at entry points, and is commonly paired with gate and access control at yards, campuses, and fleet facilities.
Do you offer video monitoring in Austin?
Yes. AK Technologies offers video monitoring for Austin businesses, built on the camera and video management platforms we install. What the monitoring covers is set per site, so tell us the locations and what needs to be watched and we will scope it with you. Request a quote.
Where we work
Austin, Round Rock, Cedar Park, Georgetown, Pflugerville, San Marcos, and commercial sites across Central Texas. Facility types include data centers, government, healthcare, higher education, K-12, financial, utilities, transportation, and manufacturing.
Start a project
Tell us the site, the camera count, and how long footage needs to be kept. A walk-through works; so does a drawing set.
Last updated